Cameron Katri's Manual Page Server

Manual Page Search Parameters
KEXT_LOGGING(8) System Manager's Manual KEXT_LOGGING(8)

kext logging — verbose/logging flags for kernel extensions (kexts) in the kernel and command-line utilities

The kext management facilities of macOS allow for logging of kext activity at all system levels, from the kernel to the user-space kext daemon and most command-line kext tools. The -verbose (-v) flag of the tools provides a simple system of levels that apply a set of lower level binary logging flags appropriate to each tool, for maximally useful verbose output. The binary log specification is used for kernel logging and is also available for use with the -verbose option when you need precise control over logging.

For command-line tools the -verbose (-v) and -quiet (-q) flags control verbose output. The -verbose flag accepts a decimal level from 0-6 or a hexadecimal log specification, both described below. The -verbose flag temporarily sets the log spec within the kernel, and captures any log messages from the kernel to print along with the tool's own log messages.

To enable kernel kext logging (in /var/log/kernel.log) on a long-term basis, use the kextlog boot arg or sysctl(8) parameter. You can set it as root using nvram(8) like so:

nvram boot-args="kextlog=0xlogspec other_boot_args"

where logspec is a hexadecimal log specification, as described below under “BINARY LOG SPECIFICATION”.

Enabling logging at a high level via boot arg can greatly slow down system startup time.

To change the kextlog setting at any time use sysctl(8):

sysctl -w debug.kextlog=0xlogspec

As mentioned, for the command-line kext tools you use the -verbose (-v) flag, which takes an optional argument that is either a decimal level from 0-6, or a hexadecimal log specification (described under “BINARY LOG SPECIFICATION”). The details of each level vary by tool, but in general they are:

0
Errors only (that is, suppress warnings). Tools with a -verbose flag also support a -quiet flag to suppress all output.
1 (or none)
Basic information about program operation.
2
Basic information about program progress, including files created.
3
Information about individual kexts, link/load operation, and processing of I/O Kit personalities.
4
Detailed information about kext operations, including C++ class construction/destruction, and for archives, about compression and architectures processed.
5
Debug-level information about internal operations.
6
Identical to level 5 but with bit 0x8 turned on (see the hexadecimal log specification for details).

The binary log specification is a 32-bit value comprising a log level with a bitmask divided into several regions from the least-significant nibble (corresponding to digits from right to left in a hexadecimal representation). This table describes the regions and bits used; unlisted regions and bits are reserved for future use:

Nibble 0
The log level, from 0-7. Each level includes all levels below it. This is generally two higher than the decimal level specified with -verbose.
Silent.
Errors.
Warnings.
Basic outcome/result.
Operation progress.
Steps in a given operation.
Detailed logging.
Debug level logging.

In addition, bit 0x8 of this nibble controls whether kext-specific log messages are always printed. kextcache(8) and kextunload(8) turn this bit on with their -verbose flag. See “PER-KEXT LOGGING” for more information.

Nibbles 1-2
Activity flags relevant to general tool use, as in development scenarios. The -verbose flag always includes these. 8 bits total.
General activity.
Load activity.
IPC and load settings.
Archive processing.
Reserved.
Nibbles 3-7
Activity flags for internal operations, for debugging the kext management system itself. These are available only when using a hexadecimal log specification; the -verbose flag never includes these. 20 bits total.
Kext validation.
Kext authentication.
Kext dependency resolution.
Directory scan (booter data scan in the kernel).
File I/O.
Kext bookkeeping.
Link activity.
C++ patching activity.
Reserved.

Many log messages apply to the kext being processed. The kernel and most of the command-line kext tools do not log these messages by default. You can enable these messages for an individual kext by specifying an OSBundleEnableKextLogging property in its Info.plist file with a boolean value of true. For convenience, kextutil(8) automatically sets this property for the kexts it is loading.

You can activate all per-kext log messages using level 6 with the -verbose flag or by turning on bit 0x8 in a hexadecimal log specification. For convenience, kextcache(8) and kextunload(8) do this for all verbose levels of their -verbose flag.

Here is a list of the exact hexadecimal log specifications applied by each of the -verbose levels:

0
equivalent to 0x0 for all tools.
(default level)
equivalent to 0xff2, 0xff9 for kextcache(8) and kextunload(8),
1 (or none)
equivalent to 0xff3, or 0xffa for kextcache(8) and kextunload(8).
2
equivalent to 0xff4, or 0xffb for kextcache(8) and kextunload(8).
3
equivalent to 0xff5, or 0xffc for kextcache(8) and kextunload(8).
4
equivalent to 0xff6, or 0xffd for kextcache(8) and kextunload(8).
5
equivalent to 0xff7, or 0xffe for kextcache(8) and kextunload(8).
6
equivalent to 0xfff for all tools.

kmutil(8), kernelmanagerd(8), syslog(1), kextcache(8), kextlibs(8), kextload(8), kextunload(8), kextutil(8)

March 6, 2009 Darwin